Hussmann DD5X5FRW, Руководство по установке и эксплуатации

Страница: 7 / 54

Roll-In
P/N 3053878_B 1-1
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
UL LISTING
These merchandisers are manufactured to meet ANSI/
UL 471 standard requirements for safety. Proper
installation is required to maintain the listing.
FEDERAL / STATE REGULATION
These merchandisers at the time they are manufactured,
meet all federal and state/ provincial regulations.
Proper installation is required to ensure these standards
are maintained. Near the serial plate, each merchandiser
carries a label identifying the environment for which the
merchandiser was designed for use.
ANSI/NSF-7 Type I – Display Refrigerator / Freezer
Intended for 75°F (24°C) / 55%RH Ambient Application
ANSI/NSF-7 Type II – Display Refrigerator / Freezer
Intended for 80°F / 55%RH Ambient Application
ANSI/NSF-7 – Display Refrigerator
Intended for Bulk Produce
LOCATION
These merchandisers are designed for displaying
products in air conditioned stores where temperature is
maintained at or below the ANSI/NSF-7 specified level
and relative humidity is maintained at or below 55%.
Placing refrigerated merchandisers in direct sunlight,
near hot tables or near other heat sources could
impair their efficiency.
Like other merchandisers, these are sensitive to
air disturbances. Air currents passing around
merchandisers will seriously impair their operation. Do
NOT allow air conditioning, electric fans, open doors
or windows, etc. to create air currents around the
merchandisers. To prevent sweating on the exterior
surfaces of merchandisers, there must be
a minimum
clearance of
3
inches
(76.2
mm
) between the
merchandisers and other fixtures or walls. Product
should always be maintained at proper temperature.
This means that from the time the product is
received, through storage, preparation and display,
the temperature of the product must be controlled to
maximize the life of the product.
SHIPPING DAMAGE
All equipment should be thoroughly examined
for shipping damage before and during unloading.
This equipment has been carefully inspected at our
factory. Any claim for loss or damage must be made
to the carrier. The carrier will provide any necessary
inspection reports and/or claim forms.
Apparent Loss or Damage
If there is an obvious loss or damage, it must be noted
on the freight bill or express receipt and signed by the
carrier’s agent; otherwise, carrier may refuse claim.
The carrier will supply necessary forms.
Concealed Loss or Damage
When loss or damage is not apparent until after
equipment is uncrated, a claim for concealed damage
is made. Upon discovering damage, make request in
writing to carrier for inspection within 15 days and
retain all packing. The carrier will supply inspection
report and required claim forms.
EXTERIOR LOADING
Do NOT walk on top of merchandisers or damage to the
merchandisers and serious personal injury could occur.
T
hey are noT sTrucTurally designed To supporT excessive
exTernal loading
such as the weight of a person. Do
not store items or flammable materials atop the unit.
INSTALLATION