Hussmann Chino MPC-ET Series, Руководство по установке и эксплуатации

Страница: 15 / 20

15
Safenet III Operation
TEMPERATURE ADJUSTMENT
1. Rotate the adjustment knob counter clockwise
for a warmer set point or clockwise for a colder set
point.
2. While adjusting the temperature, the display
shows the set point (cut out value). A few seconds
after the temperature is set, the controller reverts
to the sensed temperature in the merchandiser.
3. To verify merchandiser settings, turn the dial to
warm and cold as shown above. Output readings
should be within one degree of the temperatures
shown above.