Rev. 0608
3
Cut and Plan views
40
1
/
4
"
7
3
/
4
"
9
5
/
8
"
28
5
/
8
"
27
3
/
8
"
9
3
/
4
"
13
1
/
8
"
24
1
/
4
"
50
1
/
2
"
ISM
Refrigerated Self Service Case
Scale = 1/2"
Optional
Body
Style
Optional
Body
Style
Optional
Casters
ISM
Plan View
Scale = 1/2"
31" Base
48" Body
50
1
/
2
" Bumper
24
1
/
4
" Base
installation
location
The refrigerated merchandisers have been designed for
use only in air conditioned stores where temperature and
humidity are maintained at or below 75°F and 55% relative
humidity. DO NOT allow air conditioning, electric fans, ovens,
open doors or windows (etc.) to create air currents around
the merchandiser, as this will impair its correct operation.
Product temperature should always be maintained at a
constant and proper temperature. This means that from the
time the product is received, through storage, preparation
and display, the temperature of the product must be
controlled to maximize life of the product.
Uncrating the stand
Place the fixture as close to its permanent position as
possible. Remove the top of the crate. Detach the walls
from each other and remove from the skid. Unbolt the case
from the skid. The fixture can now be lifted off the crate
skid.
lift only at base of stand!
exterior loading
These models have
not
been structurally designed to
support excessive external loading.
do not walk on their
tops;
This could cause serious personal injury and damage
to the fixture.
leveling
imPORTanT! iT is imPeRaTive THaT Cases Be leveled
FROm FROnT TO BaCK and side TO side PRiOR TO
JOininG. a level Case is neCessaRY TO insURe
PROPeR OPeRaTiOn, WaTeR dRainaGe, PleXiGlass
aliGnmenT. levelinG THe Case CORReCTlY Will
sOlve mOsT HinGe OPeRaTiOn PROBlems.
NOTE: A. To avoid removing concrete flooring, begin lineup
leveling from the highest point of the store floor.
B. When wedges are involved in a lineup, set them first.
All cases were leveled and joined prior to shipment to
insure the closest possible fit when cases are joined in
the field. When joining, use a carpenters level and shim
legs accordingly. Case must be raised correctly, under legs
where support is best, to prevent damage to case.
