Husqvarna YTH2754T Скачать руководство пользователя

Страница: 8 / 36

ASSEMBLY

6. ATTACH MOWER SIDE SUSPENSION ARMS (A) TO

CHASSIS (See Fig. 11)

• Position front hole in side suspension arm (A) over

pin on outside of tractor chassis and secure with large

washer and large retainer spring (B).

• Repeat on opposite side of tractor.

A. MOWER SIDE

SUSPENSION

ARMS

B. RETAINER

SPRING

D. RIGHT

SIDE REAR

MOWER

BRACKET

Fig. 11

NOTE

: Depending on model, bracket (T) may be differ-

ent than shown but hole for anti-sway bar will be in same

position/location.

ANTI-SWAY BAR

(S) LOCATION

TRANSAXLE

BRACKET (T)

LOCATED

BETWEEN REAR

TIRES

PLACE 9

0° END I

NTO HO

PLACE 90° END INTO HOLE

S. ANTI-SWAY BAR

T. TRANSAXLE BRACKET

Fig. 9

8 ATTACH FRONT LINK (E) (See Fig. 13)

• Turn steering wheel to position wheels straight forward.
• From front of tractor, insert rod end of front link (E)

through front hole in tractor front suspension bracket (F).

• Move to left side of mower and and insert large retainer

spring (G) through hole in front link (E) behind front

suspension bracket (F).

• Insert other end of link (E) into hole in front mower

bracket (H) and secure with washer and small retainer

spring (J).

NOTE

: Requires deck lifting.

Fig. 13

FRONT LINK

LOCATION

E. FRONT LIFT LINK ASSEMBLY

F. FRONT SUSPENSION BRACKET

G. LARGE RETAINER SPRING

H. FRONT MOWER BRACKET

J. SMALL RETAINER SPRING

M. ENGINE CLUTCH PULLEY

Fig. 12

7. ATTACH REAR LIFT LINKS (C) (See Fig. 12)

• Insert rod end of rear lift link (C) into hole (U) in tractor lift

shaft suspension arm and pivot link down to mower.

• Lift rear corner of mower and position slot in link as-

sembly over pin on rear mower bracket (D) and secure

with large washer and large retainer spring.

• Repeat on opposite side of tractor.

C. REAR LIFT LINK(S)

D. RIGHT SIDE REAR

MOWER BRACKET

U. HOLE

D. RIGHT SIDE

REAR MOWER

BRACKET

S. ANTI-SWAY BAR

T. TRANSAXLE

BRACKET

Fig. 10

• Pivot the integrated washer end of anti-sway bar (S)

towards mower deck bracket on right side of mower.

Insert integrated washer end of bar into hole in rear

mower bracket (D). Move mower as needed to insert

integrated washer end of bar into rear mower bracket (D).

• Secure with small washer and small retainer spring as

shown.

Содержание YTH2754T





































Результаты поиска

Содержание YTH2754T

Отзывы:

Похожие инструкции для YTH2754T

Бренды по названию

Популярные бренды

Husqvarna YTH2754T, Руководство оператора

Результаты поиска

Содержание YTH2754T

Отзывы:

Похожие инструкции для YTH2754T

Бренды по названию

Популярные бренды