Husqvarna Viking Platinum Q 165 Скачать руководство пользователя страница 33

Страница: 33 / 58

32 |

powerquilter 1650 Quilti ng Machine User’s Guide

Sti tching Modes

The Plati num Q|165 enables you to choose between two modes of sti tch regulati on (Cruise and Precision)

or to choose manual sti tching.

Manual Sti tching Mode

When using the manual sti tching mode, the length of the sti tch is determined by how quickly or slowly you

move the machine around the quilt, in combinati on with the number of sti tches per minute (up to 1800)

you have selected. For a consistent sti tch length, move the machine at a consistent speed. Experiment with

diff erent combinati ons of quilti ng speed and sti tches per minute to fi nd what opti mally works for you.

To use manual sti tching mode

• Touch the

Manual

butt on and then specify the sti tches per minute (SPM) by pressing the plus (+) or

minus (–) butt ons on the screen or selecti ng one of the two white boxes with a sti tches-per-minute

preset. Pressing the plus (+) or minus (–) butt ons on the screen to change the sti tches per minute

has the same eff ect as pressing the plus (+) or minus (–) butt ons on the handlebars while in Manual

mode.

To conﬁ gure the manual sti tching mode preset speeds

The manual mode preset speeds are two sti tches-per-minute speeds, up to 1800 sti tches per minute

(SPM), that are saved for quick access from the Main screen. Aft er you set the speeds, you can choose one

of the presets when in Manual sti tching mode and it becomes the current speed. Perhaps you want one

speed when doing overall quilti ng and another speed for micro quilti ng.

Содержание Viking Platinum Q 165


























































Результаты поиска

Содержание Viking Platinum Q 165

Отзывы:

Похожие инструкции для Viking Platinum Q 165

Бренды по названию

Популярные бренды

Husqvarna Viking Platinum Q 165, Руководство пользователя

Результаты поиска

Содержание Viking Platinum Q 165

Отзывы:

Похожие инструкции для Viking Platinum Q 165

Бренды по названию

Популярные бренды