Husqvarna Viking Amber Air S 400, Руководство пользователя

Страница: 14 / 44

A
B
E
F
H
G
C
D
A
B
E
F
C
D
L
M
J
I
K
14 – GETTING READY TO SEW
Note: Raise the presser foot lifter for easier threading.
Place a thread spool on the very right spool pin. Pull the
thread through the right thread guide from back to front
(A).
Note: If the thread tends to slip away from the guide while
sewing, pass the thread through both thread guide holes as
shown (B).
Slide the thread under the top cover thread guide (C) as il -
lustrated.
Pull the thread along the threading slit. Using both hands,
insert the thread between the tension disks (D).
Set the lower looper pre-tension setting slider (E) to
NORM.
Pull the thread down along the slit and into the lower loop-
er thread guide (F).
Pull out approximately 12˝ (30 cm) of thread. Make sure
that the thread does not get tangled around the lever or the
cover.
Threading the Lower Looper
Turn off the main power switch
and unplug the machine.