Husqvarna TR 650 STRADA 2013, Руководство по ремонту, Страница: 48 / 301

D.18
TR 650 TERRA 2013 - TR 650 STRADA 2013
H11715
2
1
3
4
H11716
8
6
5
7
H11717
7
8
8
SETTINGS AND ADJUSTMENTS
Workshop Manual Ed. 09-2012
Idle speed adjustment
The idle speed is pre-set by the control unit (1550 rev/min.) and the stepper
motor ensures that this value is preserved.
No manual adjustment is possible, nor any adjustment through the diagnostic
tool.
Checking and adjustment of valve clearance
Remove the filter box and the throttle body as described in the relevant para -
graphs.
Drain the oil from the tank on the chassis as described in the relevant paragraph.
- Disconnect the connectors (1) and (2) from the coils/tubes (3) and (4).
- Remove the coils/tubes (3) and (4).
- Remove the spark plugs.
When refitting, do not invert the coils / tubes; the coil with the white
ring nut should be fitted on the outer part of the cylinder head and
the connector with the white clamp connected to the cable.
- Loosen the clamps (5) and (6) and remove the two pipes (7) and (8). Place
them so that they do not drip oil.
When refitting, do not invert the position of the two pipes;
Pipe 7 = oil return pipe to tank must go over the ABS pipes;
Pipe 8 = oil delivery pipe must go under the ABS pipes.