Husqvarna TE 250i, Руководство пользователя, Страница: 46 / 165

10 SERVICE SCHEDULE
44
Every 10 operating hours when used for motorsports
Every 40 operating hours
Every 20 operating hours
Once after 5 operating hours
Once after 1 operating hour
Check the antifreeze and coolant level. ( p. 119)
○ ● ● ●
Check the cables for damage and for routing without kinks.
● ● ●
Check that the throttle cables are undamaged, routed without sharp bends, and set
correctly.
○ ● ● ●
Clean the air filter and air filter box. ( p. 71)
● ● ●
Change glass fiber yarn filling in the main silencer. ( p. 73)
● ●
Service the fork.
●
Service the shock absorber.
●
Check the screws and nuts for tightness.
○ ● ● ●
Change the fuel screen. ( p. 130)
○ ● ● ●
Check the fuel pressure.
● ● ●
Check the headlight setting. ( p. 117)
○ ● ● ●
Check idle.
● ● ●
Final check: Check the vehicle for operating safety and take a test ride.
○ ○ ● ● ●
Read out the fault memory after the test ride using the Husqvarna Motorcycles diag-
nostics tool.
○ ○ ● ● ●
Make the service entry in the Husqvarna Motorcycles Dealer.net and in the Service
and Warranty Booklet.
○ ○ ● ● ●
○
One-time interval
●
Periodic interval
10.3 Recommended work
Every 40 operating hours when used for motorsports
Every 10 operating hours when used for motorsports
Annually
Every 80 operating hours
Every 40 operating hours
Once after 20 operating hours
Once after 10 operating hours
Change the front brake fluid.
●
Change the rear brake fluid.
●
Change the hydraulic clutch fluid. ( p. 86)
●
Grease the steering head bearing. ( p. 63)
●
Clean the pressure sensor hose.
● ● ●
Service the fork.
○
Service the shock absorber.
○
Check the electric starter drive.
● ●