Husqvarna TC 85, Руководство пользователя

Страница: 52 / 131

11 SERVICE WORK ON THE CHASSIS
50
H02312-10
–
Position the fork legs.
Air release screw
4
of the right fork leg is positioned to
the front.
Valve
A
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
A00144-12
–
Tighten screws 5 .
Guideline
Screw, bottom triple
clamp M8 15 Nm (11.1 lbf ft)
A00148-10
–
Tighten nut
3
.
Guideline
Nut, steering stem M20x1.5 10 Nm (7.4 lbf ft)
–
Position the fuel tank breather in the steering stem.
–
Tighten screw
6
.
Guideline
Screw, top triple
clamp M8 20 Nm (14.8 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
–
Tighten screws 7 .
Guideline
Screw, top triple
clamp M8 20 Nm (14.8 lbf ft)
A00143-11
–
Position the brake caliper with spacers and fit and tighten
screws
8
.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite
®
243™
–
Position the brake line and clamp. Mount and tighten
screws
9
.
Finishing work
–
Install front fender. ( p. 54)
–
Install the start number plate. ( p. 53)