Husqvarna TC 85 страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 131

background image

2 SAFETY ADVICE

7

2.5

Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing
thereof:

1 The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or

replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise
control prior to its sale or delivery to the ultimate purchaser or while it is in use, or

2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by

any person.

Among those acts presumed to constitute tampering are the acts listed below:

1 Removal or puncturing of the main silencer, baffles, header pipes or any other components which conduct

exhaust gases.

2 Removal or puncturing of parts of the intake system.
3 Lack of proper maintenance.
4 Replacing moving part of the vehicle, or parts of the exhaust or intake system, with parts other than those

specified by the manufacturer.

2.6

Safe operation

Danger

Danger of accidents

A rider who is not fit to ride poses a danger to him or herself and others.

–

Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.

–

Do not operate the vehicle if you are physically or mentally impaired.

Danger

Danger of poisoning

Exhaust gases are toxic and inhaling them may result in unconsciousness and

death.

–

Always make sure there is sufficient ventilation when running the engine.

–

Use an effective exhaust extraction system when starting or running the engine in an enclosed
space.

Warning

Danger of burns

Some vehicle components become very hot when the vehicle is operated.

–

Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake sys-
tem before the vehicle parts have cooled down.

–

Let the vehicle parts cool down before you perform any work on the vehicle.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a
safe and environmentally compatible manner.
The vehicle should only be used by trained persons.
Have malfunctions that impair safety promptly eliminated by an authorized Husqvarna Motorcycles workshop.
Adhere to the information and warning labels on the vehicle.

«
...
7
8
9
10
11
...
»

Содержание TC 85




































































































































Отзывы:

Нет отзывов

Похожие инструкции для TC 85

Бренд: yasuni Страницы: 11

Бренд: R&G Страницы: 12

Бренд: Graphite Страницы: 44

Бренд: ACERBIS Страницы: 72

Бренд: KYMCO Страницы: 424

Бренд: klicbag Страницы: 2

Body Protector 4.5 Junior

Бренд: Leatt Страницы: 40

Grizzly Minicross RCX/12 50CC

Бренд: Malaguti Страницы: 33

Бренд: SHERCO Страницы: 76

Бренд: N-Com Страницы: 2

Бренд: Dynafit Страницы: 20

YZF-R1P 2001-2003

Бренд: Yamaha Страницы: 26

Бренд: Yamaha Страницы: 36

Бренд: Yamaha Страницы: 47

Бренд: Yamaha Страницы: 87

Бренд: Yamaha Страницы: 106

Бренд: Yamaha Страницы: 114

Бренд: Yamaha Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды