Husqvarna SG11, Руководство оператора

Страница: 28 / 48

26 – English
MAINTENANCE
3/50 6/100
Page
1/25
Maintenance
Daily
maint.
before
starting
Maintenance interval months/hours
WARNING!
No service operations may be performed on the engine or unit unless:
• The engine is stopped.
• The ignition cable has been removed from the spark plug.
• The machine is securely parked where it will not tip or begin rolling.
●
= Described in this manual.
❍
= Not described in this manual.
1) First change after 20 hours. 2) In dusty conditions maintenance is required at shorter intervals. 3) Before each use.
4) Performed by authorized service workshop. 5) Performed every second year.
12/300
Check the engine oil level 36
●
Change engine oil
1)
36
Check the air filter 29
●
Clean the air filter 2) 28
●
Replace air filter cartridge 2) 29
●
Clean sludge reservoir for fuel system 30
●
Check and clean the spark plug 31
●
Replace the spark plug 31
●
Check engine switch function 3) 19
●
Check idle speed 30
●
Check and adjust play in valves
4)
-
❍
Clean fuel tank
4)
-
❍
Check, replace fuel lines as necessary
4, 5)
-
❍
Check throttle and cable
3)
19
●
Check blade and cutter
3)
33
●
Check decals and warning signs
3)
4
●
Check wear and tension on the belts
3)
32
●
Check the chassis, bolts and setscrews -
❍
Grease the blade bearings 35
●
Grease the wheels 37
●
Grease brake cable 37
●
Grease throttle cable 37
●
-/10
Maintenance schedule
The following is a list of maintenance procedures that must be performed on the machine. For those points
not described in this manual, visit an authorized service workshop.