manualshive.com logo in svg

Husqvarna SG11, Руководство оператора

Поделиться
Скачать
Husqvarna SG11 Скачать руководство пользователя страница 12

10 – English

SAFETY INSTRUCTIONS

Fuel system

•

Only store fuel in containers approved for the
purpose.

•

Never remove the fuel cap and fill the fuel tank
while the engine is running.

•

Always stop the engine when refueling.

•

Do not smoke when filling the gasoline tank
and do not pour gasoline in the vicinity of
sparks or open flame.

•

Never fill the fuel tank indoors.

•

Before starting the machine, move it at least
three meters from the site you filled the
gasoline tank.

•

Turn off the fuel supply for storage or transport.

•

If leaks arise in the fuel system, the engine
must not be started until the problem has been
resolved.

WARNING!

Gasoline and gasoline fumes are
poisonous and extremely
flammable. Be especially careful
when handling gasoline, as
carelessness can result in
personal injury or fire.

•

Check the fuel level before each use and
leave space for the fuel to expand, because
the heat from the engine and the sun may
otherwise cause the fuel to expand and
overflow.

•

Avoid overfilling. If you spill gasoline on the
machine, wipe up the spill and wait until it has
evaporated before starting the engine. If you
spill gasoline on your clothing, change your
clothing.

Never fill the fuel tank indoors.

Close the fuel valve.

Fueling always poses an element of risk.

8011-186

8011-205

8011-222

Содержание SG11

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды