Husqvarna Sapphire 960Q, Руководство пользователя

Страница: 69 / 76

M
AINTENANCE
7:3
General Problems
Bobbin alarm does not work?
&OHDQOLQWIURPEREELQDUHDDQGXVHRQO\WKHR8649$51$
VIKING ® bobbins approved for this model.
Thread cutter does not cut the thread? Remove stitch plate and clean lint from bobbin area.
Enable Selective Thread cutter Auto in the SET Menu.
)DEULFGRHVQRWIHHG"
Make sure that the feed teeth are not lowered.
Wrong stitch, irregular or narrow stitch? Deactivate Twin Needle or Stitch Width Safety Sewing Settings in the SET Menu.
The needle breaks? Insert needle correctly as described in chapter 2.
The machine will not sew? Check that all plugs are securely plugged into the machine and into the wall socket.
The screen displays the startup screen? Touch the touch screen to activate.
7XUQRII 6FUHHQ6DYHULQWKH6(70HQX
Icons on the touch screen are not activated when
touched? Calibrate the touch screen. Calibrate is found in the SET Menu (Touch Screen
Adjust).
The sewing machine screen and/or
function buttons do not respond to touch? The sockets and function buttons on the machine can be sensitive to static
electricity. If the screen does not respond to touch, turn the machine
2))DQGWKHQ21DJDLQ,I WKHSUREOHPSHUVLVWVFRQWDFW\RXUDXWKRUL]HG
+8649$51$9,.,1*
® retailer.
Needle Thread Breaks
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/705 H.
Is the needle bent or blunt? Insert a new needle.
Is the needle too small for the thread? Change the needle to the proper size for the thread.
Is the needle plate hole damaged? Change the stitch plate.
Did you thread the machine properly? Check how the machine is threaded. Rethread the machine (see page 2:5).
Are you using poor thread with slubs or
thread which has become dry?
&KDQJHWRDQHZKLJKTXDOLW\WKUHDGSXUFKDVHGIURPDQDXWKRUL]HG
+8649$51$9,.,1*
®
retailer.
Is a correct spool cap used? Attach a spool cap of the right size for the actual thread spool (see chapter 2).
If you are using a vertical spoolpin, you should not have a spoolcap on top of the spool.
Is the best spool pin position used?
7U\DGLIIHUHQWVSRROSLQSRVLWLRQYHUWLFDORUKRUL]RQWDO
Bobbin Thread Breaks
Did you insert the bobbin properly?
&KHFNWKHEREELQWKUHDGVHHSDJH
Is the needle plate hole damaged? Change the stitch plate (see page 7:2).
Is the bobbin area full of lint? Clean lint from bobbin area and use only the original bobbins approved for
WKLVPRGHOVHHSDJH
TROUBLESHOOTING
,QWKLVWURXEOHVKRRWLQJJXLGH\RXZLOOÀQGVROXWLRQVWRWKHSUREOHPV\RXPD\KDYHZLWK\RXUPDFKLQH)RUIXUWKHU
LQIRUPDWLRQSOHDVHFRQWDFW\RXUORFDODXWKRUL]HG+8649$51$9,.,1*
®
retailer who will be happy to help you.
Have Your Sewing Machine Serviced Regularly by your Local Authorized Dealer!
If you have followed this troubleshooting information and still have problems, take your sewing machine to your dealer.
,I WKHUHLVDVSHFLÀFSUREOHPLWLVDJUHDWKHOSWRWHVWVHZZLWK\RXUWKUHDGRQDVFUDSRI \RXUVHZLQJIDEULFDQGEULQJLWWR
your dealer. A sewing sample will often give much better information than words.