Husqvarna PP440HF, Руководство по ремонту, Страница: 86 / 165

86
10.2 REPAIR INSTRUCTIONS
3
5 6
4
1
1� Make sure the gear selector switch
is in second gear�
2� Insert the gear selector arm on the
axle and turn it in place on the
gear selector�
3� Place the center gear wheel and
insert the center shaft throe the
gear wheel and knock it down
with a rubber mallet�
4� Insert the first idler gear shaft.
5� Insert the second idler gear shaft�
6�
Insert the first clutch gear shaft.
First see: Remove Clutch Gear
Shafts (p. 80)
Reinstall Clutch Shafts
WS482
WS482 WS482
WS482
2
WS482
WS482
WS 440 does not have the two Idler
gear shafts (Nr�1 in orientation
picture) because it doesn’t have a gear
selector�
Orientation Picture of the shafts:
1� Clutch gear shaft
2� Center gear shaft
1� Idler gear shaft
Click
for 3D
steps