background image

General safety instructions

WARNING: Read the warning instructions

that follow before you use the product.

• This product is a dangerous tool if you are not

careful or if you use the product incorrectly. This

product can cause serious injury or death to the

operator or others. Before you use the product, you

must read and understand the contents of this

operator’s manual.

• Save all warnings and instructions.
• Comply with all applicable laws and regulations.
• The operator and the employer of the operator must

know and prevent the risks during operation of the

product.

• Do not let a person operate the product unless they

read and understand the contents of the operator's

manual.

• Do not operate the product unless you receive

training before use. Make sure that all operators

receive training.

• Do not let a child operate the product.
• Only let approved persons operate the product.
• The operator is responsible for accidents that occur

to other persons or their property.

• Do not use the product if you are tired, ill, or under

the influence of alcohol, drugs or medicine.

• Always be careful and use your common sense.
• This product produces an electromagnetic field

during operation. This field can under some

circumstances interfere with active or passive

medical implants. To decrease the risk of serious

injury or death, we recommend persons with medical

implants to speak to their physician and the medical

implant manufacturer before operating this product.

• Keep the product clean. Make sure that you can

clearly read signs and decals.

• Do not use the product if it is defective.
• Do not do modifications to this product.
• Do not operate the product if it is possible that other

persons have done modifications to the product.

Safety instructions for operation

WARNING: Read the warning instructions

that follow before you use the product.

• Make sure that you know how to stop the engine

quickly in an emergency.

• The operator must have the physical strength that is

necessary to operate the product safely.

• Do not operate the product without all protective

covers installed.

• Use personal protective equipment. Refer to 

Personal protective equipment on page 7

.

• Make sure that only approved persons are in the

work area.

• Keep the work area clean and bright.
• Make sure that you are in a safe and stable position

during operation.

• Make sure that there is no risk that you or the

product can fall from a height.

• Make sure that there is no grease or oil on the

handle.

• Do not use the product in areas where fire or

explosions can occur.

• The product can cause objects to eject at high

speed. Make sure that all persons in the work area

use approved personal protective equipment.

Remove loose objects from the work area.

• Before you go away from the product, stop the

engine and make sure that there is no risk of

accidental start.

• Make sure that clothes, long hair and jewelry do not

get caught in moving parts.

• Do not sit on the product.
• Do not hit the product.
• Always operate the product from behind with your

hands on the handle.

• Do not operate the product near electrical cables.

The product does not have electrical insulation and

injury or death can occur.

• Before you operate the product, find out if there are

hidden wires, cables and pipes in the work area. If

the product hits a hidden object, stop the engine

immediately and examine the product and the object.

Do not start to operate the product again until you

know that it is safe to continue.

Vibration safety

WARNING: Read the warning instructions

that follow before you use the product.

• During operation of the product, vibrations go from

the product to the operator. Regular and frequent

operation of the product can cause or increase the

degree of injuries to the operator. Injuries can occur

in fingers, hands, wrists, arms, shoulders, and/or

nerves and blood supply or other body parts. The

injuries can be debilitating and/or permanent, and

can increase gradually during weeks, months or

years. Possible injuries include damage to the blood

circulation system, the nervous system, joints, and

other body structures.

• Symptoms can occur during operation of the product

or at other times. If you have symptoms and

continue to operate the product, the symptoms can

increase or become permanent. If these or other

symptoms occur, get medical aid:
• Numbness, loss of feeling, tingling, pricking,

pain, burning, throbbing, stiffness, clumsiness,

6

1229 - 002 - 06.04.2020

Содержание LG 504

























Отзывы: