Husqvarna LG 400, Руководство оператора

Страница: 19 / 28

To replace the oil in the eccentric
element
1. Remove the oil drain plug for the eccentric element
and connect a hose.
2. Tilt the product to drain the oil.
Note: You can also use a manual oil drain pump to
drain the oil in the eccentric element.
3. Clean the surfaces around the hole for the oil drain
plug, the threads of the hole and the oil drain plug.
Use a dry cloth and, if it is necessary, an applicable
solvent.
CAUTION: Do not use water to clean
around and on the oil drain plug.
4. Fill the eccentric element with oil of the correct type.
Refer to
Technical data on page 22
.
5. Install the oil drain plug.
To do a check of the battery
1. Disconnect the battery cables (A).
B
A
A
C
C
2. Examine the battery for damages (B). Replace the
battery if it is damaged.
3. Clean the battery terminals (C).
4. Connect the battery cables.
To charge the battery
• If the battery is not used for a long period of time,
charge it fully before you use it.
1224 - 002 - 06.04.2020 19