Husqvarna LG 400, Руководство оператора

Страница: 18 / 28

1. Turn the knob on the air filter cover and remove the
air filter cover.
2. Remove the air filter.
3. Clean the air filter housing with a brush.
4. Examine the air filter for damage.
5. Tap the air filter against a hard surface or use a
vacuum cleaner to remove the particles.
CAUTION: Do not let the nozzle of the
vacuum cleaner touch the surface of the
paper filter element. Keep a small
distance. The sensitive surface of the
paper filter element becomes damaged if
objects touch it.
6. Install the air filter in the opposite sequence.
To do a check of the V-belt
WARNING: Do not operate the product
without the V-belt cover installed.
1. Stop the engine.
2. Remove the V-belt cover.
3. Examine the V-belt for damages and wear. Replace
the V-belt if it is necessary.
4. Do a check of the V-belt tension.
5. If the V-belt tension is not sufficient, do this
procedure:
a) Loosen the screw on the belt tensioner (A).
A
b) Push the belt tensioner rearward.
c) Tighten the screw on the belt tensioner.
6. Install the V-belt cover.
Note: There is an inspection hole on the V-belt cover
that can be used to do a check of the tension. To
examine the V-belt for damages it is necessary to
remove the V-belt cover.
18 1224 - 002 - 06.04.2020