background image

• Keep your hands on the handle or handles only.

Keep all other body parts away from the product.

• Stop the product immediately if strong vibrations

suddenly occurs. Do not continue the operation

before the cause of the increased vibrations is

removed.

Dust safety

WARNING: Read the warning instructions

that follow before you use the product.

• Operation of the product can cause dust in the air.

Dust can cause serious injury and permanent health

problems. Silica dust is regulated as harmful by

several authorities. These are examples of such

health problems:
• The fatal lung diseases chronic bronchitis,

silicosis and pulmonary fibrosis

• Cancer
• Birth defects
• Skin inflammation

• Use correct equipment to decrease the quantity of

dust and fumes in the air and to decrease dust on

work equipment, surfaces, clothing and body parts.

Examples of controls are dust collection systems

and water sprays to bind dust. Decrease dust at the

source where possible. Make sure that the

equipment is correctly installed and used and that

regular maintenance is done.

• Use approved respiratory protection. Make sure that

the respiratory protection is applicable for the

dangerous materials in the work area.

• Make sure that the airflow is sufficient in the work

area.

• If it is possible, point the exhaust of the product

where it cannot cause dust to go into the air.

Exhaust fumes safety

WARNING: Read the warning instructions

that follow before you use the product.

• The exhaust fumes from the engine contain carbon

monoxide which is an odourless, poisonous and very

dangerous gas. To breathe carbon monoxide can

cause death. Because carbon monoxide is odourless

and cannot be seen, it is not possible to sense it. A

symptom of carbon monoxide poisoning is dizziness,

but it is possible that a person becomes unconscious

without warning if the quantity or concentration of

carbon monoxide is sufficient.

• Exhaust fumes also contain unburned hydrocarbons

including benzene. Long-term inhalation can cause

health problems.

• Exhaust fumes that you can see or smell also

contain carbon monoxide.

• Do not use a combustion engine product indoors or

in areas that do not have sufficient airflow.

• Do not breathe the exhaust fumes.
• Make sure that the airflow in the work area is

sufficient. This is very important when you operate

the product in trenches or other small work areas

where exhaust fumes can easily collect.

Noise safety

WARNING: Read the warning instructions

that follow before you use the product.

• High noise levels and long-term exposure to noise

can cause noise-induced hearing loss.

• To keep the noise level to a minimum, do

maintenance on and operate the product as given in

the operator's manual.

• Examine the muffler for damages and defects. Make

sure that the muffler is correctly attached to the

product.

• Use approved hearing protection while you operate

the product.

• Listen for warning signals and voices when you use

hearing protection. Remove the hearing protection

when the product is stopped, unless hearing

protection is necessary for the noise level in the work

area.

Personal protective equipment

WARNING: Read the warning instructions

that follow before you use the product.

• Always use approved personal protective equipment

when you operate the product. Personal protective

equipment cannot fully prevent injury but it

decreases the degree of injury if an accident does

occur. Let your dealer help you select the correct

personal protective equipment.

• Regularly do a check of the condition of the personal

protective equipment.

• Use an approved protective helmet.
• Use approved hearing protection.
• Use approved respiratory protection.
• Use approved eye protection with side protection.
• Use protective gloves.
• Use boots with steel toe-cap and non-slip sole.
• Use approved work clothing or equivalent close-

fitting clothing that has long sleeves and long legs.

Fire extinguisher
• Keep a fire extinguisher near during operation.
• Use a powder fire extinguisher of "ABE" class or a

carbon dioxide fire extinguisher of "BE" type.

6

1388 - 001 - 

Содержание LFV 100





















Отзывы:

Похожие инструкции для LFV 100