Husqvarna LFV 100, Руководство оператора

Страница: 16 / 20

Storage
• Remove all fuel from the fuel tank before you put the
product in storage for a long period of time. Discard
the fuel at an applicable disposal location.
• Clean the product before storage. Remove oil and
dust from the rubber parts.
• Clean the air filter before storage.
• Carefully pull the starter rope handle until there is a
small resistance. This closes the valves and makes
sure that moisture cannot go into the engine
cylinder.
• Put a protective cover on the product.
• Keep the product in a dry and frost free area.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
Accessories
Accessory LFV 80 LFV 100
Transport wheel kit, part number 594 20 49-01
Water Tank, part number 596 39 29-02
Forklifting device, part number 595 50 31-01
Low Vibration Handle, part number 594 20 50-01
Block paving kit, part number 594 86 81-01 594 86 82-01
Technical data
Technical data LFV 80 LFV 100
Honda Honda Hatz
Net weight, kg/lb 80/176.4 91/200.6 101/222.7
Operation weight (EN500, incl. oil, ½ fuel), kg/lb 81.4/179.5 92.4/203.7 102.4/225.8
Engine brand, type Honda, GX160 Honda, GX160 Hatz, 1B20
Engine power, kW/hp @rpm 1 3.6/4.8 @3600 3.6/4.8 @3600 3.2/4.3 @3100
Vibration frequency, Hz/rpm 95/5700 95/5700 95/5700
Amplitude, mm/in. 1.27/0.05 0.91/0.04 0.91/0.04
Centrifugal force, kN/lbf 19.4/4361 16.7/3754 16.7/3754
Operation speed, m/min or ft./min 33 or 108.2 25 or 82 25 or 82
Max. tilt, degrees/% 20/36 20/36 25/47
Fuel tank capacity, l/qts 3.1/3.3 3.1/3.3 3.6/3.8
1
As specified by the engine manufacturer. The power rating of the engine indicated is the average net output
(at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/
ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on
the final product will depend on the operating speed, environmental conditions and other values.
16 1388 - 001 -