Husqvarna K 6500 II Ring, Руководство оператора

Страница: 25 / 124

MAINTENANCE
English
–
25
The guide roller is pressed into the knob. In order to
loosen the guide roller, you need to continue turning
the knob until it loosens completely.
• The guide roller can now be pulled out of the chassis.
• Screw the knob until it bottoms, and then loosen the
knob 2 turns.
• Insert the new guide roller in the chassis.
• Lubricate the guide rollers. See instructions under the
heading ”Lubricating the guide rollers”.
• Fit the blade.
• Assemble in the reverse order as set out for
dismantling. See instructions in the section
"Assembling and adjustments".
Support rollers
• Replace the support rollers when the roller surface is
flat, when the groove on the roller surface has worn
away.
1) New
2) Worn
Replacing the support rollers
Remove the support roller cover.
• Use a 19 mm fixed spanner and a 13 mm combination
spanner to replace the rollers.
NOTICE! The support rollers do not drive the blade.
When worn rollers are replaced with new ones, you
must adjust the rollers against the blade.
Incorrect adjustment can result in damage to the blade.
See the instructions under the ”Assembly and Settings”
heading.
If the blade rotates slowly or stops, stop cutting
immediately and trouble shoot.