Husqvarna FC 250 2017, Руководство пользователя

Страница: 77 / 114

14 ELECTRICAL SYSTEM
75
–
Slide positive terminal cover  over the positive terminal.
–
Connect negative cable

to the battery.
Guideline
Screw, battery terminal M5 2.5 Nm
(1.84 lbf ft)
–
Slide negative terminal cover

over the negative terminal.
Finishing work
–
Mount the seat. ( p. 46)
–
Install the air filter box cover. ( p. 46)
14.3 Recharging the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
9 V
–
Dispose of batteries with less than the minimum voltage correctly.
Warning
Environmental hazard Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Return batteries to your authorized Husqvarna Motorcycles dealer or dispose of them at a collection point for used bat-
teries.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable
regulations.
Info
Even when there is no load on the battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, or charging time are exceeded, the battery will be destroyed.
If the battery is depleted by repeated starting, the battery must be charged immediately.
If the battery is left in a discharged state for an extended period, it will become over-discharged and sulfated, destroying the
battery.
The battery is maintenance-free.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the air filter box cover. ( p. 46)
–
Remove the seat. ( p. 45)
–
Remove the battery. ( p. 74)