Husqvarna F2303V7, Руководство пользователя

Страница: 138 / 170

18 SERVICE WORK ON THE ENGINE
136
Guideline
Gear oil drain plug
with magnet M12x1.5 20 Nm (14.8 lbf ft)
401955-11
–
Remove filler plug
2
with the O-ring, and fill up with gear oil.
Gear oil 0.80 l
(0.85 qt.) Engine oil (15W/50)
(
p. 156)
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check for leaks.
Finishing work
–
Check the gear oil level. ( p. 135)
–
Install the engine guard. ( p. 86)
18.7 Adding the gear oil
Info
Too little gear oil or poor-quality gear oil results in premature wear to the transmission.
Gear oil must only be topped up when the engine is cold.
Preparatory work
–
Park the motorcycle on a level surface.
F02322-10
Main work
–
Remove gear oil level monitoring screw
1
.
401955-11
–
Remove filler plug
2
with the O-ring.
–
Add gear oil until it emerges from the drill hole of the gear oil
level monitoring screw.
Engine oil (15W/50) ( p. 156)
–
Mount and tighten the gear oil level monitoring screw.
Guideline
Screw, gear oil level
monitoring M6 8 Nm (5.9 lbf ft)
–
Mount and tighten filler plug
2
with the O-ring.