Husqvarna F2303U7, Руководство пользователя

Страница: 157 / 171

TECHNICAL DATA 23
155
Spring length 260 mm (10.24 in)
Gas pressure 10 bar (145 psi)
Static sag 37 mm (1.46 in)
Riding sag 110 mm (4.33 in)
Fitted length 477 mm (18.78 in)
Shock absorber fluid ( p. 158) SAE 2.5
23.9 Chassis tightening torques
Remaining screws, chassis EJOT PT
®
K60x25
‑
Z 1 Nm (0.7 lbf ft)
Screw, intake air temperature sen-
sor EJOT PT
®
K50x18 0.7 Nm (0.52 lbf ft)
Screw, oil fill level sensor
G 3/4 "
7 Nm (5.2 lbf ft)
Screw, oil pump holder on oil tank EJOT DELTA PT
®
45x12
‑
Z 0.7 Nm (0.52 lbf ft)
Screw, pressure regulator EJOT PT
®
K60x25
‑
Z 2.3 Nm (1.7 lbf ft)
Screw, seat fixing EJOT EJOFORM PT
®
K60x23/18 2.5 Nm (1.84 lbf ft)
Screw, emergency OFF switch
(All EU models) M4 0.4 Nm (0.3 lbf ft)
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite
®
243™
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
Screw, frame protector M5 3 Nm (2.2 lbf ft)
Screw, shock absorber adjusting
ring M5 5 Nm (3.7 lbf ft)
Screws on main silencer M5 7 Nm (5.2 lbf ft)
Nut, starter motor M6 4 Nm (3 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, absorbing element on
frame M6 6 Nm (4.4 lbf ft)
Screw, absorbing element on
manifold M6 6 Nm (4.4 lbf ft)
Screw, ball joint of push rod on
foot brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, chain sliding guard M6 6 Nm (4.4 lbf ft)
Loctite
®
243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, rear brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, throttle grip M6 5 Nm (3.7 lbf ft)
Fuel connection on fuel pump M8 10 Nm (7.4 lbf ft)
Nut, foot brake lever stop M8 20 Nm (14.8 lbf ft)