Husqvarna F2301V6, Руководство пользователя

Страница: 55 / 157

SERVICE WORK ON THE CHASSIS 11
53
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 146)
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Install the fork protector. ( p. 53)
–
Remove the motorcycle from the lift stand. ( p. 51)
11.5 Removing the fork protector
S01902-10
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
and take off the left fork protector.
–
Remove screws
3
and take off the right fork protector.
11.6 Installing the fork protector
S01902-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line and clamp. Mount and tighten
screws
2
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
11.7 Removing the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 51)
–
Remove the front wheel. ( p. 97)