Husqvarna F2101Q1, Руководство по ремонту

Страница: 244 / 321

18 CLUTCH
-
Check clutch throw-out
0
for damage and wear.
If there is damage or wear:
-
Change the clutch push rod.
-
Check axial bearing
48
for damage and wear.
If there is damage or wear:
-
Change the axial bearing.
-
Place the clutch push rod
(D
on a flat surface and check for run-out.
If there is run-out:
-
Change the clutch push rod.
-
Check the length of clutch springs �.
R00004-01
I
Clutch spring - length
I�
38.5 mm(� 1.516 in)
If the clutch spring length is shorter than specified:
-
Change all clutch springs.
-
Check the contact surface of clutch pressure cap
C,
for damage and wear.
If there is damage or wear:
-
Change the clutch pressure cap.
-
Check clutch basket
48
for damage and wear.
If there is damage or wear:
-
Change the clutch basket.
-
Check needle bearing G) and collar sleeve
4D
for damage and wear.
If there is damage or wear:
-
Change the needle bearing and collar sleeve.
-
Check intermediate clutch discs
4D
and
41)
for damage and wear.
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
-
Check clutch facing discs ., for discoloration and scoring.
If there is discoloration or scoring:
-
Change all clutch facing discs.
-
Check the thickness of clutch facing discs .,_
242