Husqvarna F2101Q1 Скачать руководство пользователя страница 121

Страница: 121 / 321

<::;Vt:.-

WHEELS 14

Warning

Danger of accidents

Damaged brake discs reduce

the braking effect.

- Always lay the wheel down in such a way that the

brake disc is not damaged.

Hold the front wheel and remove the wheel spindle. Take the

front wheel out of the fork.

Info

Do not actuate the hand brake lever when the front

wheel is removed.

Remove spacers

CD.

...

lill<?[

� [Ill

�0$

H00934-10

14.7.2

Installing the front wheel

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

- Always keep the brake discs free of oil and grease.
-

Clean the brake discs with brake cleaner when necessary.

H00935-10

Check the wheel bearing for damage and wear.

If the wheel bearing is damaged or worn:

Change front wheel bearing. (

p. 120)

Clean and grease shaft seal rings

and contact

surfaces

of the spacers.

Long-life grease (

p. 292)

Insert the spacers.

Clean and grease the wheel spindle.

Long-life grease (

p. 292)

Position the front wheel and insert the wheel spindle.

✓ The brake linings are correctly positioned.

119

Содержание F2101Q1


































































































































































































































































































































Результаты поиска

Содержание F2101Q1

Отзывы:

Husqvarna F2101Q1, Руководство по ремонту, Страница: 121 / 321

Результаты поиска

Содержание F2101Q1

Отзывы: