Husqvarna F2101Q1, Руководство по ремонту

Страница: 208 / 321

17 ENGINE
Mount lock ring (D.
310363-11
17.4.30 Checking the electric starter drive
•- • �-
310350-10
Check the gear mesh and bearing of starter idler gear
O
for damage and wear.
If there is damage or wear:
-
Change the starter idler gear.
Check the gear mesh and bearing of torque limiter
8
for damage and wear.
If there is damage or wear:
-
Change the torque limiter.
Check the gear mesh and bearing of freewheel gear (D for damage and wear.
If there is damage or wear:
-
Change the freewheel gear or bearing.
Check freewheel
C,
for damage and wear.
If there is damage or wear:
-
Change the free wheel.
Check the gear mesh of starter motor
0
for damage and wear.
If there is damage or wear:
-
Change the starter motor.
Change O-ring
C)
of the starter motor.
..
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Connect the posi­
tive cable of the power supply briefly with the connector of the starter motor.
If the starter motor does not turn when the circuit is closed:
206