17 ENGINE
If there is run-out:
- Change the push rod.
- Check the length of clutch springs
8.
I
Clutch spring - length
If the clutch spring length is less than the specified value:
- Change all clutch springs.
I�
38.5 mm(� 1.516 in)
- Check the thrust face of pressure cap Ci) for damage and wear.
If there is damage or wear:
- Change the pressure cap.
- Check the thrust surfaces of the clutch facing discs in the outer clutch hub (3 for wear.
I
Contact surface of clutch facing discs in outer clutch hub
I �
0.5 mm (� 0.02 in)
If the contact surface exhibits significant wear:
- Change the clutch facing discs and the outer clutch hub.
- Check needle bearing @ and collar sleeve
CD
for damage and wear.
If there is damage or wear:
- Change the needle bearing and collar sleeve.
- Check intermediate clutch discs
@)
and
G,
for damage and wear.
If the intermediate clutch discs are not even or are pitted:
- Change all intermediate clutch discs.
- Check clutch facing discs Qi) for discoloration and scoring.
If there is discoloration or scoring:
- Change all clutch facing discs.
- Check the thickness of clutch facing discs Qi).
I
Clutch facing discs - thickness of total package
If the clutch facing discs do not meet specifications:
- Change all clutch facing discs.
- Check disc
48
for damage and wear.
If there is damage or wear:
- Change the disc.
- Check the inner clutch hub � for damage and wear.
If there is damage or wear:
- Change the inner clutch hub.
- Check sleeve
4D
for damage and wear.
If there is damage or wear:
- Change the sleeve.
I � 26.4 mm (� 1.039 in)
159
Содержание F2101O1
Страница 1: ...PIONEERING SINCE 1903 REPAIR MANUAL2015 FC250 Art no 3403012en Husqvarna MOTORCYCLES ...
Страница 2: ......