Husqvarna F1103V5, Руководство пользователя

Страница: 56 / 133

12 SERVICE WORK ON THE CHASSIS
54
F02716-10
Main work
–
Push dust boots
1
of both fork legs downward.
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
Warning
Danger of accidents
Oil or grease on the brake
discs reduces the braking effect.
–
Always keep the brake discs free of oil and
grease.
–
Clean the brake discs with brake cleaner when
necessary.
–
Clean and oil the dust boots and inside fork tubes of both
fork legs.
Universal oil spray ( p. 123)
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Take the motorcycle off the front lifting gear. ( p. 53)
–
Remove the rear of the motorcycle from the lifting gear.
( p. 51)
12.6 Removing the passenger seat
H02674-10
–
Insert the ignition key in seat lock
1
and turn it clockwise.
–
Raise the rear of the passenger seat, push it towards the rear,
and lift it off.
–
Remove the ignition key from the seat lock.
12.7 Mounting the passenger seat
H02675-10
–
Attach hooks
1
on the passenger seat to seat mounting
2
on the subframe, and lower it at the rear while pushing for-
ward.
–
Press passenger seat downward until it clicks into place.