12
104 72 72-26
Height of needle bar
Check
1. Set pattern selector dial to straight "A".
2. Remove shuttle hook holder.
3. Set needle at its lowest point.
4. Check that the point of the needle and the bottom surface of shuttle hook will align.
Adjustment
1. Remove the face cover
2. Set pattern selector dial to straight "A".
3. Remove the shuttle hook holder.
4. Set needle at its lowest point.
5. Loosen 2mm Allen screw (A) of needle bar bracket.
6. Adjust height of needle by moving the needle bar upward / downward.
7. Stop at the position when the point of the needle and bottom surface of shuttle hook will align.
8. After adjustment, tighten screw (A) of needle bar bracket.
9. Re-assemble the shuttle hook holder accordingly.
10. Attach the face cover.
( A )
Содержание E10
Страница 1: ...Service Manual 104 72 72 26 Made in Sweden 11 Aug 2010 ...
Страница 31: ...104 72 72 26 31 ...
Страница 32: ...32 104 72 72 26 ...
