Husqvarna CRT 48-35L, Руководство оператора

Страница: 73 / 122

wc_tx004037gb_FM10.fm
73
Engine Maintenance: Kubota
The engine maintenance schedule(s) in this chapter are reproduced from the
engine owner’s manual. For additional information, see the engine owner’s
manual.
SERVICE INTERVALS
: If necessary
*
IMPORTANT:
Non-warranty maintenance, repair, or replacement of the emission control devices and systems should be performed by
a qualified repair establishment or individual which has the experience and equipment to perform such work.
See the Emission Warranty Statement.
*
1 Change more often when operating under dusty conditions.
In order to keep your engine in good working conditions, be sure to follow the maintenance / checking schedule given in
the table below. (The schedule applies to an engine in use under normal conditions.)
2 If you do not have the proper tools and/or are not mechanically proficient, contact your local KUBOTA dealer.
Items
Interval
Remarks
Every
8 hours
(daily)
Every
50 hours
Every
(weekly)
100
hours
Every
200
hours
Each part Check / Clean
To ensure the best quality and reliability, use new KUBOTA Genuine parts or their equivalents for repair and replacement,
whenever you have maintenance done.
Engine oil
Check /
Replenish
Change
(Initial
change)
Change
(Initial
change)
Oil filter cartridge
Clean
Spark plug Adjust
Change
Check
Clean Air cleaner element
Change
clamp bands
Intake pipe /
Change
Fuel filter
Check
Change
Clean
Fuel tank
Gasoline line
Check setting LPG line
Fuel pipe / clamps
Check
(Gasoline line)
Change
Fuel pipe / clamps
(LPG line: LPG tank
to regulator assy
(D-EPR))
Check the
connector
Check fuel
leakage
Change
770084