Husqvarna CRT 48-35L, Руководство оператора

Страница: 38 / 122

wc_tx004193gb_FM10.fm
38
Operation CRT48
4.5 Recommended Fuel
—
Gasoline
The engine requires regular grade unleaded gasoline. Use only fresh, clean
gasoline. Gasoline containing water or dirt will damage the fuel system. Consult the
engine owner’s manual for complete fuel specifications.
Use of
oxygenated
fuels
Some conventional gasolines are blended with alcohol. These gasolines are
collectively referred to as oxygenated fuels. If you use an oxygenated fuel, be sure
it is unleaded and meets the minimum octane rating requirement.
Before using an oxygenated fuel, confirm the fuel’s contents. Some states and
provinces require this information to be posted on the fuel pump.
The following is the Wacker Neuson approved percentage of oxygenates:
ETHANOL - (ethyl or grain alcohol) 10% by volume. You may use gasoline
containing up to 10% ethanol by volume (commonly referred to as E10). Gasoline
containing more than 10% ethanol (such as E15, E20, or E85) may not be used
because it could damage the engine.
If you notice any undesirable operating symptoms, try another service station, or
switch to another brand of gasoline.
Fuel system damage or performance problems resulting from the use of an
oxygenated fuel containing more than the percentages of oxygenates mentioned
above are not covered under warranty.
4.6 Recommended Fuel—Diesel
Low temperatures cause diesel fuel to gel. Always use the proper fuel for the
conditions. Follow the guidelines in the table below.
1
Your engine may require ultra low sulfur fuel. Consult the engine owner’s manual.
Lowest expected ambient
temperature
Recommended fuel
1
Above freezing
> 0°C (32°F) #2 diesel plus additives
Below freezing
< 0°C (32°F) Winter-blend diesel
CAUTION
Fire hazard.
►
Do not use gasoline, crankcase oil, or any oil containing gasoline.