1. Clean and inspect the machine and the functions
before use.
2. Check for leaks and damages.
Operation
Starting up BV 20E
1. Check the machine's power supply connector for
any damages.
2. Connect the plug (A) to an electrical outlet with
the correct power supply.
C
B
A
3. When using the machine for the first time, turn
the throttle knob (B) on the control unit to its
maximum counter clockwise direction.
NOTICE
To prevent the knob from changing
during work the knob may seem a bit hard to
turn.
4. Set the switch (C) to "ON" to start the machine.
5. Increase the speed to the desired level by turning
the knob (B) clockwise.
Stopping BV 20E
1. Set the switch (C) to "OFF" to stop the machine.
NOTICE
The speed does not have to be
reduced first when turning the vibrator off. At next
start up, the machine will continue running at the
set speed.
Starting up BV 20G
1. Open the fuel valve.
2. If the engine is cold, close the choke.
3. Check that the engine speed lever is set to idle.
A
B
4. Set the switch to “ON” position.
OFF
ON
ON
13
© 2015 Construction Tools EOOD | No. 9800 1189 01b | 2015-05-12
Original instructions
Safety and operating instructions
BV 20E, 20G
To
order
go
to
Discount-Equipment.com
