Husqvarna BMS 220 ADB, Руководство оператора

Страница: 11 / 100

Note:
The product does not charge when the
ON/OFF key is in the ON position.
2. Connect the charger and keep the charger
connected until the next time you use the product.
To remove a soft floor surface
WARNING:
Use protective gloves. The
blades are very sharp.
Note:
Short blades cut the floors easier than long
blades. Long blades are not always better or faster. A
short blade usually cleans the floor better than a wide
blade.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 6
.
2. Install a self scoring blade. Refer to
To select the
correct blade dimension and installation position on
page 9
and
To replace the blade on page 15
.
WARNING:
Use protective gloves.
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
To sharpen the
blade on page 15 .
4. Cut a linear ditch in the floor.
5. Install a flat blade.
WARNING:
Use protective gloves.
The blades are very sharp.
6. Start at the ditch and remove the floor.
1
2
To remove a hard floor surface
WARNING:
Use protective gloves. The
blades are very sharp.
Note:
Short blades cut the floors easier than long
blades. Long blades are not always better or faster. A
short blade usually cleans the floor better than a wide
blade.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
2. Install a short blade of the correct type. Refer to
To
select the correct blade dimension and installation
position on page 9
and
To replace the blade on page
15 .
WARNING:
Use protective gloves.
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
To sharpen the
blade on page 15
.
1813 - 001 - 11.05.2022 11