Husqvarna AUTOMOWER 260 ACX Скачать руководство пользователя

Страница: 7 / 72

6 - English

1. INTRODUCTION AND SAFETY

1.4 Safety instructions

Use

•

Please read the Operator's Manual carefully and
make sure you understand the instructions
before using Automower

•

It is not permitted to modify the original design of
Automower

. All modifications are made at your

own risk.

•

Check that there are no stones, branches, tools,
toys or other objects on the lawn that can
damage the blades and cause the mower to
stop.

•

Start Automower

according to the instructions.

When the main switch is in the

position;

make sure you keep your hands and feet away
from the rotating blades. Never put your hands
and feet under the mower.

•

Never lift up Automower

or carry it around when

the main switch is in the

position.

•

Do not let persons who do not know how
Automower

works and behaves use the mower.

•

Never use Automower

if persons, especially

children, or pets, are in the immediate vicinity.

•

Do not put anything on top of Automower

or its

charging station.

•

Do not allow Automower

to be used with a

defective blade disc or body. Neither should it be
used with defective blades, screws, nuts or cables.

•

Do not use Automower

if the main switch does

not work.

•

Always switch off Automower

using the main

switch when you do not intend to use the mower.
Automower

can only start when the main switch

is moved to the

position and the correct PIN

code has been entered.

•

Automower

must never be used at the same time

as a sprinkler. In this case use the timer function,
see

6.4 Timer (2)

on page 43, so the mower and

sprinkler never run simultaneously.

•

Husqvarna AB does not guarantee full
compatibility between Automower

and other

types of wireless systems such as remote
controls, radio transmitters, buried electric animal
fencing or similar.

Содержание AUTOMOWER 260 ACX








































































Результаты поиска

Содержание AUTOMOWER 260 ACX

Отзывы:

Похожие инструкции для AUTOMOWER 260 ACX

Бренды по названию

Популярные бренды

Husqvarna AUTOMOWER 260 ACX, Руководство оператора

Результаты поиска

Содержание AUTOMOWER 260 ACX

Отзывы:

Похожие инструкции для AUTOMOWER 260 ACX

Бренды по названию

Популярные бренды