background image

5

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER.  
Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments.  
Save this manual for future reference.

MEETS CPSC SAFETY REQUIREMENTS

Our rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute 
and the U.S. Consumer Product Safety Commission.  The blade turns when the engine is running.

OPERATOR PRESENCE CONTROL BAR –

 must  be held 

down to the handle to start the engine.  Release to stop 
the engine.

STARTER HANDLE –

 used for starting the engine.

HOUSING

GRASS 
CATCHER

PRIMER –

 pumps additional fuel from the carburetor to the 

cylinder for use when starting a cold engine.

MULCHER DOOR –

 allows conversion to discharge or 

bagging operation.

OPERATOR PRESENCE CON TROL BAR

WHEEL ADJUSTER 
(ON EACH WHEEL)

STARTER 
HANDLE

EN GINE OIL CAP 
WITH DIPSTICK

HANDLE KNOB

GAS O LINE FILL ER CAP

These symbols  may appear on your lawn mower or in literature supplied with the product.  Learn and understand 
their meaning.

PRIMER

OPERATION

IMPORTANT

:  This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.

MUFFLER

AIR FILTER

MULCHER DOOR

Содержание 7021CM





















Отзывы: