background image

7

OPERATION

TO EMPTY GRASS CATCHER (See Fig. 6)

1.    Lift up on grass catcher using the frame han dle.

2.    Remove grass catcher with clippings from under lawn 

mower han dle.

3.      Empty clippings from bag using both frame handle and 

bag handle.

NOTE

:  Do not drag the bag when emptying;  it will cause 

unnecessary wear.

FIG. 6

GRASS 

CATCHER

FRAME 

HANDLE

BAG 
HANDLE

FIG. 5

OPEN 

MULCHER 

DOOR

DISCHARGE 
DEFLECTOR

BEFORE STARTING ENGINE

ADD OIL (See Fig. 7)

Your lawnmower is shipped without oil in the engine. For type 
and grade of oil to use, see “EN GINE” in the Maintenance 
section of this manual.

CAUTION: DO NOT overfi ll engine with 
oil, or it will smoke on startup.

1.    Be sure lawnmower is level.  

2.    Remove oil dipstick from oil fi ll spout.

3.    Engine holds 20 ounces of oil.  For type and grade of 

oil to use, see “ENGINE” in the Maintenance section 
of this manual.

4.      Pour oil slowly.  Do not overfi ll.  Wait one minute to allow 

oil to settle.  Insert and tighten dipstick, then remove it 
to check oil level.

IMPORTANT:

•      Check oil level before each use.  Add oil if needed.  Fill 

to full line on dipstick.

•         Change the oil after every 25 hours of operation or each 

season.  You may need to change the oil more often 
under dusty, dirty conditions.  See “TO CHANGE EN-
GINE OIL” in the Maintenance section of this manual.

Содержание 7021CM





















Отзывы: