Husqvarna 520iRX Скачать руководство пользователя страница 8

WARNING: Never allow

children to use or be in

the vicinity of the

machine. Since the

machine is easy to start,

children may be able to

start it if they are not kept

under full surveillance.

This can mean a risk of

serious personal injury.

Therefore disconnect the

battery when the

machine is not under

close supervision.

General safety instructions

WARNING: Read the

warning instructions that

follow before you use the

product.

Remove the battery to

prevent the product from

being started by accident.

This product is a dangerous

tool if you are not careful or if

you use the product

incorrectly. This product can

cause serious injury or death

to the operator or others.

Do not use the product if it is

changed from its initial

specification. Do not change

a part of the product without

approval from the

manufacturer. Only use parts

that are approved by the

manufacturer. Injury or death

is a possible result of

incorrect maintenance.

Do a check of the product

before use. See, 

Safety

devices on the product on

page 15

 and 

Maintenance

on page 27

. Do not use a

defective product. Do the

safety checks, maintenance

and service instructions

described in this manual.

Children should be

supervised to ensure that

they do not play with the

product. Never allow children

or other persons not trained in

the use of the product and/or

the battery to use or service

it. Local laws may regulate

the age of the user.

Keep the product in a locked

area to prevent access for

children or persons that are

not approved.

Store the product out of reach

of children.

Under no circumstances may

the design of the product be

modified without the

permission of the

manufacturer. Always use

8

757 - 001 - 24.10.2018

Содержание 520iRX





































Отзывы: