Husqvarna 520iRX, Руководство оператора, Страница: 25 / 36

1. Push the operation direction button to make the
trimmer head turn counterclockwise. The green LED
is on when the trimmer head turns counterclockwise.
Note: It is easier to tap out the trimmer line to make it
longer when the trimmer head turns clockwise.
To loosen cut material from the grass blade/grass
cutter
If a grass blade/grass cutter is used, the rotation
direction is counterclockwise. A green LED shows that
the grass blade/grass cutter rotates counterclockwise.
Change rotation direction to clockwise to loosen the cut
material from the grass blade/grass cutter.
1. Push the rotation direction button to change the
rotation direction.
Note: When the rotation direction is changed to
clockwise, cut material is loosened from the grass blade/
grass cutter. The speed of the grass blade/grass cutter
decreases for a short period of time before it rotates
counterclockwise again.
To balance the product
• Connect the harness to the support hook (A) or the
loop hanger (B) on the product.
B
A
• Keep the cutting attachment parallel to the ground.
• The product is correctly balanced when the blade is
at cutting height near the ground.
To trim grass with a trimmer head
To trim the grass
1. Hold the trimmer head immediately above the
ground at an angle. Do not push the trimmer line into
the grass.
2. Decrease the length of the trimmer line by 10-12
cm / 4-4.75 in.
3. Decrease the engine speed to decrease the risk of
damage to plants.
4. Use 80 % throttle when you cut grass near objects.
To clear grass
1. Keep the trimmer head above the ground.
2. Tilt the trimmer head.
3. Cut with the end of the trimmer line around objects in
the work area.
CAUTION: Cut grass. Other objects that
are hit by the trimmer line, increases the
wear on the trimmer line.
4. Use 80% speed when you cut and clear vegetation.
This decreases the wear on the trimmer head and
trimmer line.
757 - 001 - 24.10.2018 25