Husqvarna 520iRX Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 36

Husqvarna 520iRX Скачать руководство пользователя страница 27

3. Turn the handlebar around the shaft.

4. Tighten the knob.

Maintenance

Introduction

WARNING: Read and understand the safety

chapter before you do maintenance on the

product.

Maintenance schedule

WARNING: Remove the battery before you

do maintenance.

The following is a list of the maintenance steps that you

must do on the product. See

Maintenance on page 27

for more information.

Maintenance

Daily

Weekly

Monthly

Clean the external parts of the product with a dry cloth. Do not use water.

X

Examine that the start and stop button works correctly and is not damaged.

X

Make sure that the power trigger and the power trigger lockout function correctly

from a safety point of view.

X

Make sure that all controls work and are not damaged.

X

Keep the handles dry, clean and free from oil and grease.

X

Make sure that the cutting attachment is not damaged. Replace the cutting at-

tachment if it is damaged.

X

Make sure that the cutting attachment guard is not damaged. Replace the cut-

ting attachment guard if it is damaged.

X

Make sure that the screws and nuts are tight.

X

Make sure that the battery release buttons on the battery works and locks the

battery in the product.

X

Examine that the battery charger is not damaged and function correctly.

X

Make sure that the battery is not damaged.

X

Make sure that the battery is charged.

X

Make sure that the battery charger is not damaged.

X

Examine all cables, couplings and connections. Make sure they are not dam-

aged and free from dirt.

X

Do a check of the connections between the battery and the product. Do a check

of the connection between the battery and the battery charger.

X

757 - 001 - 24.10.2018

27

«
...
25
26
27
28
29
...
»

Содержание 520iRX





































Отзывы:

Нет отзывов