Husqvarna 500HD 56EL, Руководство оператора

Страница: 26 / 52

GB-1
ENGLISH
Hedge Trimmer
2. General safety instructions
Machine noise information regulation 3, GSGV: the
noise pressure level at the place of work can exceed 85
dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention : Noise protection ! Please observe the local
regulations when operating your device.
Interference suppressed in accordance with EN
55014, EN 61000-3-2:95, EN 61000-3-3:95 .
We reserve the right to make changes to the technical
specifications.The hedge trimmers are constructed in
line with the latest regulations in accordance with DIN-
EN 50144-1and DIN-EN 50144-2-15 and conform fully
to equipment safety law regulations.
General safety instruction
Usage of hedge trimmer always involves a risk of
accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations. Nevertheless,
use of the machine can involve risks to the user or
third persons, and can cause damage to the machine
or other objects.
Attention: Using electric power tools, you must
observe following fundamental safety instructions to
protect yourself against electric shock, against
danger of injuries and danger of fire. Read all these
instructions before using the hedge trimmer and
observe them. Keep these safety instructions at a
safe place.
Use the machine in a safety conscious manner for
suitable applications in a technically perfect
condition only and with due regard to the operating
instructions! Immediately rectify or have rectified any
faults which could adversely affect safety!
This machine may cause serious injuries. Please
read the instruction manual carefully as to the
correct handling, the preparations, the maintenance
and the proper use of the hedgetrimmer. Familiarize
your-self with the machine before the first use and
also have yourself introduced to practical use of the
machine.
3. Application
The machine is only intended for trimming hedges.
Use for any other purpose constitutes inappropriate
use. The manufacturer / supplier is not liable for any
injury and/or damage arising from inappropriate
use. This risk is the sole responsibility of the
user.Appropriate use of the machine also includes
adherence to the operating instructions and
compliance with the servicing and maintenance
instructions.
Always keep the instruction manual close at hand
during operation!
4. Safety instruction
1. Always disconnect the plug from the mains
socket before carrying out any work on the
equipment, before cleaning and before moving
the equipment.
2. The use of hedge trimmers involves certain risks.
Attention: Danger! Rotating machinery.
3. The hedge trimmer should always be held with
both hands.
4. Before using the equipment clear the working
area of any foreign objects and be aware of
foreign objects during operation of the machine!
If the machine becomes jammed e.g. by thick
branches, switch off and disconnect the machine
from the mains socket before investigating and
rectifying the cause of the jam. Take special care
when switching the machine on again.
5. Check the flex and all connections for any visible
faults before using the machine (plug discon-
nected). Do not use a faulty flex.
6. Keep the flex away from the cutting area.
7. Do not use the trimmer in wet weather and do not
use it to cut wet hedges.Do not wash down the
device with water. Do not use any high-pressure
cleaning devices or steam jet devices for
cleaning.
1. Introducing the hedgetrimmer
Technical data 500HD 56EL 600HD 60EL
Operating Voltage V~ 230 230
Nominal Frequency Hz 50 50
Nominal Consumption W 500 500
Mains Safety Fuse A 16 16
Cutting movements min-1 3600 2400
Shear length m m 560 600
Cutting Thickness m m 22 27
Weight (without flex) kg 3,6 3,7
Noise Pressure Level LpA according to EN 50144 88 dB (A) 89 dB (A)
Vibration according to EN 50144 <4,7 m/s2 <2,4 m/s2