Husqvarna 500, Руководство по обслуживанию

Страница: 35 / 54

34 35
104 72 57-26
104 72 57-26
Setting the country code- Rose.
Keep the CLR-key pressed until the main switch is put on.
Select a new country code with the right or left arrow.
The machine will always remember the most recently set country code.
Codes:
00 gives figures as colour code
01 gives Swedish as colour code
06 gives Danish as colour code
11 gives Finnish as colour code
21 gives Norwegian as colour code
26 gives English as colour code
31 gives French as colour code
36 gives Dutch as colour code
41 gives Italian as colour code
46 gives Spanish as colour code
51 gives German as colour code
60 gives Portuguese as colour code
81 gives Croatian as colour code
82 gives Polish as colour code
90 gives Czech as colour code
Upper thread tension - Rose , Iris
To facilitate the setting of the upper thread tension there is an electronic adjustment
in the normal function position.
Operation
Switch on the main switch. Then select one of the following combinations.
Emboidery key ( ⇓ ) arrow down and (+) thread tension key plus.
Is used at fine adjustment of the upper thread tension at normal position .
Instead of a stitch number TT is shown on the display and instead of the stitch length
a setting value.
Setting no 21 (page 24).
Emboidery key ( ⇓ )arrow down and (-) thread tension key minus.
Is used at fine adjustment of the upper thread tension at embroidery position .
Instead of a stitch number TC is shown on the display and instead of the stitch
length a setting value.
Setting no 22 (page 26)