Husqvarna 353O4 Скачать руководство пользователя страница 6

Страница: 6 / 25

GENERAL SAFETY PRECAUTIONS

–

English

Impor

tant

Personal protective equipment

OTECTIVE HELMET AND VISOR

HEARING PROTECTION
Wear hearing protection that provides adequate noise

reduction.

EYE PROTECTION
Blows from branches or objects that are thrown out by a

harvesting equipment can damage the eyes.

GLOVES
Gloves should be worn when necessary,

IMPORTANT!
The machine is only designed for harvesting olive and

fruits atached to the branches
Never use a machine that has been

in any way

from its or
Never use the machine if you are tired, if you have drunk

alcohol, or if you are taking medication that could ect

your vision, your judgement or your co-ordination.
Wear personal protective equipment. See instructions

under the heading Personal protective equipment.
Never use the machine in extreme weather conditions

such as severe cold, very hot and/or humid climates.
Never use a machine that is faulty. Carry out the checks,

maintenance and service instructions described in this

manual. Some maintenance and service measures

must be carried out by trained and

specialists.

See instructions under the heading Maintenance.
All covers and guards m

fore starting.

Ensure that the spark plug cap and ignition lead are

undamaged to avoid the risk of electric shock.

ARNING! The ignition system of this

machine produces an electromagnetic

under some circumstances interfere with

pacemakers.To reduce the risk of

serious or fatal injury we recommend

persons with pacemakers to consult

their physician and the pacemaker

manufacturer before operating this

machine.

ARNING! Running an engine in a

ly ventilated area can

result in death due to asphyxiation or

carbon monoxide poisoning.

ARNING! Never allow children to use or

be in the vicinity of the machine. As the

machine is equipped with a spring-

loaded stop switch and can be started by

low speed and force on the starter

handle,even small children under some

circumstances can proudce the force

necessary to start the machine.This can

mean a risk of serious personal injury.

Therefor remove the spark plug cap

when the machine is not under close

supervision.

IMPOR

TANT!

A harvesting equipment is a dangerous tool if used

carelessly or

incorrectly and can cause serious, even fatal

injuries. It

is extremely important that you read and

understand the

contents of this Operator’s Manual.
You must use approved personal protective equipment

whenever you use the machine. Personal protective

equipment cannot eliminate the risk of injury but it will

reduce the degree of injury if an accident does happen.

Ask your dealer for help in choosing the right equipment.

ARNING! Listen out for warning signals

or shouts when you are wearing hearing

protection. Always remove your hearing

protection as soon as the engine stops.

Содержание 353O4


























Результаты поиска

Содержание 353O4

Отзывы:

Похожие инструкции для 353O4

Бренды по названию

Популярные бренды

Husqvarna 353O4, Руководство оператора

Результаты поиска

Содержание 353O4

Отзывы:

Похожие инструкции для 353O4

Бренды по названию

Популярные бренды