Husqvarna 322, Руководство по ремонту

Страница: 5 / 34

4
1
A
Starter
WARNING!
Protective glasses should be worn when working on the starter to avoid injury to the
eyes if, for some reason, the return spring should fly out.
!
!
Dismantling
Remove the 3 bolts and lift out the starter.
NOTE!
Ensure the bushes (A) that guide the starter against the fuel tank are not lost.
Assembly
Clean all component parts before
assembling.
Replace the return spring/starter pulley
and starter cord if necessary.
NOTE!
The return spring and the starter pulley
are supplied assembled and are fitted in
the starter housing as a single unit.
Exercise care when opening the
packaging so that the spring does not
fly out.
Assembly
Clean all component parts and assem-
ble in the reverse order as stated for
dismantling.
WARNING!
Use protective glasses. The return
spring is tensioned in the starter
pulley and can fly out and cause
personal injury with negligent
handling.
Off-load the spring pressure as de-
scribed in the Workshop Manual.
Remove the bolt from the centre of the
starter pulley. Carefully lift the starter
pulley out of the starter housing.
Off-load the spring pressure.
Remove the bolt from the centre of the
starter pulley and lift off the starter
pulley.
1 Eng, 1-6 98-12-14, 17.05 4