Husqvarna 27012978100, Инструкция по монтажу

Страница: 23 / 62

ENGLISH
MOUNTING 5
9
5.1 Mounting
Warning
Danger of accidents
Loading luggage can significantly affect the handling characteristics.
–
When the rear bag is fitted, the handling characteristics, as well as the cornering and braking cha-
racteristics, may change due to greater crosswind sensitivity, especially when fully laden. Take care
in strong winds. Due to the changed handling characteristics, approach the permitted maximum
speed of 130 km/h slowly.
Warning
Danger of accidents Never exceed the payload of 3 kg.
–
The rear bag must always remain closed while riding. A rear bag that is damaged in any way may
no longer be used. Always make sure that all accessory parts and luggage are carefully attached.
Check this regularly.
Info
Use warm soapy water and a soft, clean cloth to clean the rear bag. Do not use harsh cleaning agents
or rough cleaning utensils.
Info
Textiles may undergo slight color changes and fade if exposed to prolonged and intense sunlight.
500724-01
Preassembly
–
Preassemble attachment loops
2
and the appropriate
components from the fitting kit (all included).
500725-01
TC, TE, TX, FC and FE
–
Remove the original screws.
–
Mount and tighten attachment loops
2
with the appro-
priate screws, washers and bushings (all included in the
fitting kit).
500726-01
701 Enduro and 701 SM
–
Take off the seat (see Owner's Manual).
–
Remove the original screws.
–
Mount and tighten attachment loops
2
with screws
bl
(all included in the fitting kit).
–
Mount the seat (see Owner's Manual).