Husqvarna 125 TC EU Скачать руководство пользователя

Страница: 58 / 109

12 BRAKE SYSTEM

12.1

Checking the free travel of the hand brake lever

Warning

Danger of accidents

Brake system failure.

–

If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit. The front brake can fail due to

overheating. Adjust the free travel on hand brake lever according to specifications.

L01801-10

–

Push the hand brake lever forward and check free travel

Free travel of hand brake lever

≥

3 mm (

≥

0.12 in)

» If the free travel does not meet specifications:

–

Adjust the basic position of the hand brake lever. (

p. 56)

12.2

Adjusting the basic position of the hand brake lever

L01801-11

–

Check the free travel of the hand brake lever. (

p. 56)

–

Adjust the basic setting of the hand brake lever to your hand size by turning adjusting
screw

Info

When the adjusting screw is turned clockwise, the hand brake lever moves

away from the handlebar.

When the adjusting screw is turned counterclockwise, the hand brake lever

moves closer to the handlebar.

The range of adjustment is limited.

Turn the adjusting screw by hand only, and do not apply any force.

Do not make any adjustments while riding!

12.3

Checking the brake discs

Warning

Danger of accidents

Reduced braking efficiency due to worn brake disc(s).

–

Change the worn brake disc(s) without delay. (Your authorized Husqvarna workshop will be glad to help.)

400257-10

–

Check the thickness of the front and rear brake discs at several places on the disc to

see if it conforms to measurement

Info

Wear reduces the thickness of the brake disc around the area used by the

brake linings.

Brake discs - wear limit

Front

2.5 mm (0.098 in)

Rear

3.5 mm (0.138 in)

» If the brake disc thickness is less than the specified value:

–

Change the brake disc.

–

Check the front and rear brake discs for damage, cracking and deformation.
» If the brake disc exhibits damage, cracking or deformation:

–

Change the brake disc.

Содержание 125 TC EU














































































































Результаты поиска

Содержание 125 TC EU

Отзывы:

Похожие инструкции для 125 TC EU

Бренды по названию

Популярные бренды

Husqvarna 125 TC EU, Руководство пользователя

Результаты поиска

Содержание 125 TC EU

Отзывы:

Похожие инструкции для 125 TC EU

Бренды по названию

Популярные бренды