Husqvarna 125 TC EU Скачать руководство пользователя страница 55

Страница: 55 / 109

11 SERVICE WORK ON THE CHASSIS

Info

When the adjusting screw is turned counterclockwise, the clutch lever

moves away from the handlebar.

When the adjusting screw is turned clockwise, the clutch lever moves

closer to the handlebar.

The range of adjustment is limited.

Turn the adjusting screw by hand only, and do not apply any force.

Do not make any adjustments while riding!

B01898-10

(250 TC EU)

–

Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw

Info

When the adjusting screw is turned counterclockwise, the clutch lever

moves closer to the handlebar.

When the adjusting screw is turned clockwise, the clutch lever moves

away from the handlebar.

The range of adjustment is limited.

Turn the adjusting screw by hand only, and do not apply any force.

Do not make any adjustments while riding!

11.48

Checking/correcting the fluid level of the hydraulic clutch

Info

The fluid level rises with increasing wear of the clutch lining discs.

L00953-10

(125 TC EU)

–

Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.

–

Remove screws

–

Remove cover

with membrane

–

Check the fluid level.

Fluid level under top edge of container 4 mm (0.16 in)

» If the level of the fluid does not meet specifications:

–

Correct the fluid level of the hydraulic clutch.

Hydraulic oil (15) (

p. 100)

–

Position the cover with the membrane. Mount and tighten the screws.

L01222-10

(250 TC EU)

–

Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.

–

Remove screws

–

Remove cover

with membrane

–

Check the fluid level.

Fluid level under top edge of container 4 mm (0.16 in)

» If the level of the fluid does not meet specifications:

–

Correct the fluid level of the hydraulic clutch.

Brake fluid DOT 4 / DOT 5.1 (

p. 100)

–

Position the cover with the membrane. Mount and tighten the screws.

Info

Wash off overflowed or spilled brake fluid immediately with water.

Содержание 125 TC EU














































































































Результаты поиска

Содержание 125 TC EU

Отзывы:

Похожие инструкции для 125 TC EU

Бренды по названию

Популярные бренды

Husqvarna 125 TC EU, Руководство пользователя

Результаты поиска

Содержание 125 TC EU

Отзывы:

Похожие инструкции для 125 TC EU

Бренды по названию

Популярные бренды