Husqvarna 120e MARK II Скачать руководство пользователя

Страница: 37 / 40

EC Declaration of Conformity

EC Declaration of conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:

+46-36-146500, declares under sole responsibility that

the chainsaws for forest service Husqvarna 545 Mark II,

545G Mark II, 550 XP Mark II and 550 XPG Mark II from

2018’s serial numbers and onwards (the year is clearly

stated in plain text on the type plate with subsequent

serial number), are in conformity with the requirements

of the COUNCIL’S DIRECTIVES:
• of May 17, 2006 ”relating to machinery” 2006/42/EC.
• of February 26, 2014 ”relating to electromagnetic

compatibility” 2014/30/EU.

• of May 8, 2000 ”relating to the noise emissions in the

environment” 2000/14/EC.

• of June 8, 2011 ”on the restriction of the use of

certain hazardous substances in electrical and

electronic equipment” 2011/65/EU.

The following standards have been applied: EN ISO

12100:2010, EN ISO 14982:2009, EN ISO

11681-1:2011, EN 50581:2012.
Notified body: 0404, RISE SMP Svensk Maskinprovning

AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried

out EC type examination in accordance with the

machinery directive’s (2006/42/EC) article 12, point 3b.

The certificates for EC type examination in accordance

with annex VI, has the numbers: 0404/18/2514 – 545

Mark II, 0404/18/2514 - 545G Mark II, 550 XP Mark II

and 550 XPG Mark II.
In addition, 0404, RISE SMP Svensk Maskinprovning

AB, Box 7035, SE-750 07 Uppsala, Sweden, has

certified conformity with annex V of the Council’s

Directive of May 8, 2000 ”relating to the noise emissions

in the environment” 2000/14/EC. The certificates have

the numbers: 01/161/112 - 545 Mark II, 545G Mark II,

01/161/113 - 550 XP Mark II, 550 XPG Mark II.
For information relating to noise emissions, refer to

Technical data on page 33

The supplied chainsaw conforms to the example that

underwent EC type examination.
Huskvarna, 2018-08-15

Per Gustafsson, Development manager (authorized

representative for and responsible for technical

documentation.)

544 - 005 - 10.05.2019

Содержание 120e MARK II









































Результаты поиска

Содержание 120e MARK II

Отзывы:

Похожие инструкции для 120e MARK II

Бренды по названию

Популярные бренды

Husqvarna 120e MARK II, Руководство оператора

Результаты поиска

Содержание 120e MARK II

Отзывы:

Похожие инструкции для 120e MARK II

Бренды по названию

Популярные бренды