Husqvarna 115iHD45, Руководство оператора

Страница: 10 / 196

GENERAL SAFETY PRECAUTIONS
10 – English
means that the power trigger on the rear handle is
automatically locked at no operation state.
Turn on the machine. Press the power trigger on the front
handle.
(Figure 6)
Then press the power trigger on the rear handle up to
apply full power.
(Figure 7)
Release the power trigger on the rear handle and check
thereby the free back movement of the power trigger. The
cutting unit must stop within 1 second.
Restart the machine and release the power trigger on the
front handle on the front handle. Check that the power
trigger lockout returns to its original position when you
release it. The cutting unit must stop within 1 second.
Hand guard
The hand guard prevents hands from coming into contact
with the moving blades, for example, if the operator loses
grip on the front handle.
(Figure 9)
Check that the hand guard is fitted correctly. Check that
the hand guard is undamaged.
Blade and blade guard
The outer part of the blades (1) is shaped as blade
guards.
(Figure 9)
Check that the blade guard is not damaged or distorted.
Replace the cutting unit if it is bent or damaged.
Battery and battery charger
This section describes the battery and battery charger
safety for your battery product.
Only use Husqvarna original batteries for Husqvarna
products and only charge them in an original battery QC
charger from Husqvarna. The batteries are software
encrypted.
Use only a Husqvarna original BLi battery in your
machine.
Battery safety
The rechargeable Husqvarna batteries, BLi, are
exclusively used as a power supply for the relevant
Husqvarna cordless appliances. To avoid injury, the
battery must not be used as a power source for other
devices.
(Figure 2)
• Use the battery in surroundings where temperatures
are between -10
°
C and 40
°
C.
• Do not expose the battery to microwaves or high
pressure.
• Never clean the battery or the battery charger with
water. See instructions under the Maintenance
heading.
• Store the battery out of reach of children.
• Protect the battery from rain and wet conditions.
• Do not open or mutilate the battery(ies). Released
electrolyte is corrosive and may cause damage to the
eyes or skin. It may be toxic if swallowed.
Battery charger safety
Only use Chargers, Husqvarna QC, for charging the
Husqvarna replacement batteries, BLi.
(Figure 3)
!
WARNING! Protect the battery from
direct sunlight, heat or open flame. There
is a risk the battery may explode if it is
thrown into an open fire. There is a risk of
burns and/or chemical burns.
!
WARNING! Avoid all skin contact with
battery acid. Battery acid may cause skin
irritation, burns or corrosive injuries. If
you get acid in your eyes, do not rub but
flush your eyes with plenty of water for at
least 15 minutes. See a doctor. You must
wash any exposed skin with copious
amounts of water and soap in case of
incidental contact.
!
WARNING! Never connect the battery
terminals to keys, coins, screws or other
metal as this may short-circuit the
battery. Never insert objects into the
battery's air vents.
Unused batteries must be kept away from
metal objects such as nails, coins,
jewellery. Do not try to disassemble or
crush the battery
!
WARNING! Minimise the risk of electric
shock or short circuit as follows:
Never insert any object into the charger’s
cooling slots.
Do not try to dismantle the battery
charger.
Never connect the charger terminals to
metal objects as this can short circuit the
battery charger.
Use approved and intact wall sockets.