Husqvarna Viking Sapphire 835, Руководство пользователя

Страница: 42 / 56

42
Basic sewing techniques
Manual Buttonholes
A buttonhole can also be sewn step by step without the Sensor
One-Step Buttonhole Foot connected. Use the reverse button to
set the length of the buttonhole.
1. Snap on Presser Foot C.
2. Place the fabric and stabilizer under the presser foot. Use the
markings on the left toe of the buttonhole foot to position
the garment edge. Place the edge of the garment at the
middle mark to have 5/8’’ (15 mm) from the edge to the
buttonhole.
3. Begin sewing the buttonhole. The sewing machine will sew
the left column in reverse. A reverse icon is shown on the
GraphicDisplay indicating that you need to press the Reverse
button to step to the next part of the stitch. When the
buttonhole has reached the desired length, press the Reverse
button. Your sewing machine will bartack the end and stitch
the right side.
4. Sew to the starting mark and press the Reverse button to sew
the second bartack. Keep the foot control depressed until the
buttonhole is
À nished. The machine will stop automatically
when the buttonhole is complete.
1:0, 1:23-28 Buttonhole Stitches
Fabric: All types of fabric.
Select: The fabric you are using
and the Buttonhole technique (The
Exclusive SEWING ADVISOR™
feature selects a buttonhole suitable
for your fabric).
Use: Presser Foot C and the needle
recommended for your fabric.
Corded Buttonhole (Stretch fabrics)
When sewing buttonholes in stretch fabrics we recommend
cording the buttonhole to increase the stability and to keep the
buttonhole from stretching out.
1. Loop a piece of heavy thread or gimp cord over the À nger on
the back of Presser Foot C.
2. Stitch a buttonhole. Let the satin buttonhole columns stitch
over the cord.
3. Stop sewing before the last end of the buttonhole is sewn.
Lift the cord off the À nger and pull out the slack.
4. Cross the cord in front of the needle and stitch the end of the
buttonhole over the cord.